中文
English
Deutsch
Español
Français
C400
C400
C400 woodworking combination machine
The C400 Combined Machine has been specifically designed be an industrial standard machine, but at a size intended for the factory and small professional workshop. This industrially rated machine features a table saw and sliding table, planer, thicknesser and spindle moulder unit. The cast iron construction, accurate cross cut fence and superb build quality put this machine in a class of its own. Being a professional standard machine, the C300 of course is fully adjustable and the accuracy is second to none. As far as accuracy goes it will not even be bettered by full sized industrial machines. With three independent class 1 motors providing ample power, changing function can be done with the flick of a switch rather than the going through the laborious task of changing belts. The saw utilises a sliding beam which runs along side the blade like a panel saw. By running the beam this close to the blade, 100% accuracy is assured. The planer thicknessing function, again is of the highest quality, extremely powerful, accurate and the end result is simply sublime. The inward swing of the thicknessing unit keeps this machine compact in every function,whilst the cast iron construction means even heavy pieces can be handled confidently. Several further options are also available, each machine can therefore be tailored to the users specific needs. These options include; heavy duty morticing unit, spindle moulder ring fence, power feeder and tenoning hood.
Technical parameter :
Planer | Unit | C400 |
Working table | mm | 400*1800 |
Cutterblock diameter | mm | 70 |
Cutterblock rotation speed | r.p.m. | 5700 |
N. of knives | N。 | 3 |
Knives dimensions | mm | 400*20*3(400*25*3) |
Max table adjustement | mm | 4 |
Thicknesser | Unit | C400 |
Working table | mm | 400*760 |
Feed speed | m/1' | 7 |
Max.working height | mm | 220 |
Min.working height | mm | 4 |
Cutterblock rotation speed | r.p.m. | 5700 |
Max.cutting depth | mm | 4 |
Mortiser | Unit | C400 |
Working table | mm | 250*500 |
Longitudinal stroke | mm | 205 |
Trasversal stroke | mm | 95 |
Vertical stroke | mm | 90 |
Churck | mm | 16 |
Churck rotation speed | r.p.m. | 5700 |
Circular saw | Unit | C400 |
Working table | mm | 326*1112 |
Shaft rotation speed | r.p.m. | 4500 |
Blade diameter | mm | 300 |
Blade bora diameter | mm | 30 |
Cutting height 90。 | mm | 100 |
Max.distance between blade and fence | mm | 730 |
Blade inclination | 0。 | 45。 |
Max cutting height 45。 | mm | 50 |
Shaft rotation speed engraver | r.p.m. | 7000 |
Engraver blade diameter | mm | 90 |
Engraver blade bora diameter | mm | 22 |
Shaper | Unit | C400 |
Working table | mm | 326*1112 |
Shaft rotation speeds | r.p.m. | 2000/3100/4400/7000 |
Standard shaft diameter | mm | 30 |
Spindle lenght | mm | 105 |
Shaft vertical stroke | mm | 115 |
Max.tool diameter | mm | 180 |
Max.tenoning depth | mm | 65 |
Tenoning carriage | Unit | C400 |
Carriage dimensions | mm | 1800*315 |
Carriage stroke | mm | 1800/2200 |
Standard accessories | Unit | C400 |
N。2 clamp level | * | |
Sharper fence | * | |
Service wrenches | * | |
Mortiser chuck | * | |
Table extensions with swinging arms | mm | 860*600 |
Guards on mortiseur chuck | * | |
3 pcs.planing knives | * | |
Planer guide | ||
Saw guide | ||
Bridge safety hood on planer | * | |
3-phase motor power | HP-KW | 4.0-3.0 |
Weight | kg | 645 |
Optional accessories | Unit | C400 |
Single-phase motor | HP-KW | 4.0-3.0 |
Increasing 3-phase motor | HP-KW | 5.5-4.0 |
Set of wheels with feeding steering bar | * | |
Wescott(Diameter) | mm | 16 |
Carriage stroke | mm | 2200/2200 |
Carriage stroke | mm | 2600/2600 |
Tenoning with protection shelf |
Contact Us Address: Room 102, 1st Floor, East Office Building, No. 45 Pengwan Road, Qianwan Bonded Port Area, Qingdao District | 
|